More Views

  • Description

Details

A strong, smooth, fast building liquid wrap base coat and the best product to use at the start of every application. High build primer™ is specially formulated to lay down a thicker, higher solids film that easily covers the majority of small defects commonly found on used vehicles, it also gives the user less chance of product sags / runs in the tricky to paint areas at the beginning of the application process.

Please note only the following pigment manufactures are approved by ngenco limited

DYC Pearls

Pearls And pigments

KP Pigments

Recommended spray gun(s)

Sata Hvlp, Divilbiss GPI

Recommended spray gun setup(s)

1.7 – 1.8

Recommended pressure(s)

1.7 – 2.0 bar

Average amount of product needed

Motobike

1 Gallon High build Primer and 1 Gallon of SprayWrapPro or 2 Gallons of SprayWrapPro

Small size vehicle

2 Gallons High Build Primer and 2 Gallons of SprayWrapPro or 4 Gallons of SprayWrapPro

Medium size vehicle

2 Gallons High Build Primer and 3 Gallons of SprayWrapPro or 5 Gallons of SprayWrapPro

Large size vehicle

2 Gallons High Build Primer and 4 Gallons of SprayWrapPro or 6 Gallons of SprayWrapPro

Recommended amount of coats

3 coats of High build primer and 7 coats of Spray wrap Pro. or 10 coats of Spray Wrap pro

Recommended dry time between coats

10 minutes at 60C. or  Air drying is very dependent on the ambient temperature, Air dry until touch dry.

Recommended final dry time (before topcoat is applied)

30mins at 60C. or Air drying is very dependent on the ambient temperature, Air dry for a minimum of 1 hour to ensure majority of carriers have evaporated out of the coating.